Introduction:

This sealing machine is suitable for the sealing of various plastic film bags, non-woven bags, kraft paper bag, etc.

Instruction:

1.Plug the power cord into a 220V power outlet. Adjust the heating time according to the thickness of the material to be sealed. Put the plastic skirt on the sealing surface, and then press the handle / depress the foot pedal, the circuit automatically controls the heating time, and the power can be automatically disconnected when the indicator light goes out. After about 1-2 seconds. Let go of the handle and it's sealed.

2. After adjusting the heating time. It should remain unchanged during use. No need to make any adjustments during continuous use.

3. If the plastic bag is stuck on the silicone pressure plate, the cooling time is not enough. The cooling time (after the light goes out) must be extended, please release the handle a little later.

4. If the seal is damaged during sealing, it is because the heating time is too long, please turn the knob counterclockwise to shorten the heating time.